Stainless Steel Cleat Indoor/outdoor for 30mm – 90mm diameter cables Jointing Tech Part Number Wolseley Part Number CJ1892 CJ1876 CJ1898 JZ3207 CJ1883 CJ1879 Cable Diameter 30-35 mm 35-40 mm 40-45 mm 45-50 mm 50-55 mm 55-60 mm 60-65 mm 65-70 mm 70-75 mm 75-80 mm 80-85 mm 85-90 mm FEATURES ■ Suitable for cable diameters 30mm – 90mm Cleat body and fastenings are manufactured from 316L corrosion resistant non-magnetic stainless steel which makes them suitable for use in harsh and extreme environments including marine and offshore applications The cleat liner is manufactured from an LUL approved flame-retardant halogen free extruded polymer The main cleat fastening bolt is retained to ease installation Cleats are supplied with an easy fit spacer plate to assist with range take Suitable for use with all standard ladder and tray systems Compliant with IEC 61914 ■ ■ ■ ■ ■ ■ Test Standard IEC61914:2015 Clause Test Classification Clause Test Classification Material 6.1.3 Composite Resistance to short circuit 6.4.4 1 short circuit 9.5.2 44kA RMS, 103.3kA Pk - tested on 34mm diameter cables at 300mm cleats spacings (Test report: 125158/VNL) Operating Temperature 6.2 -40°C to + 60°C Impact Resistance 6.3.5 9.2 Very Heavy Corrosion 6.5.2.2 Body >16% Chromium contents - High, Outdoor - wet conditions Lateral strength 6.4.2 9.3 >500N vertical Flame propagation 10.1 > 30 secs >200N Horizontal Cleat Spacing Cleat spacing is dependent on system fault level and centre to centre distance between cables / cable diameter. Therefore correct cleat spacing should be calculated for each installation and environment. Axial strength 6.4.3 9.4 >50N (for guidance only as not possible to replicate in test setups) SSC 3035 SSC 3540 SSC 4045 SSC 4550 SSC 5055 SSC 5560 SSC 6065 SSC 6570 SSC 7075 SSC 7580 SSC 8085 SSC 8590 Sicuro Single Stainless Steel Cleat www.jointingtech.co.uk 14
RkJQdWJsaXNoZXIy NTI5NzM=