Stainless Steel Cleat Sicuro Trefoil www.jointingtech.co.uk 15 Stainless Steel Cleat Indoor/outdoor for 20mm – 70mm diameter cables Jointing Tech Part Number Wolseley Part Number Cable Diameter FEATURES ■ Suitable for cable diameters 20mm – 70mm Cleat body and fastenings are manufactured from 316L corrosion resistant non-magnetic stainless steel which makes them suitable for use in harsh and extreme environments including marine and offshore applications The cleat liner is manufactured from an LUL approved flame-retardant halogen free extruded polymer The main cleat fastening bolt is retained to ease installation Cleats are supplied with an easy fit spacer plate to assist with range take Suitable for use with all standard ladder and tray systems Compliant with IEC 61914 ■ ■ ■ ■ ■ ■ Test Standard IEC61914:2015 Clause Test Classification Clause Test Classification Material 6.1.3 Composite Resistance to short circuit 6.4.4 1 short circuit 9.5.2 44kA RMS, 103.3kA Pk - tested on 34mm diameter cables at 300mm cleats spacings (Test report: 125158/VNL) Operating Temperature 6.2 -40°C to + 60°C Impact Resistance 6.3.5 9.2 Very Heavy Corrosion 6.5.2.2 Body >16% Chromium contents - High, Outdoor - wet conditions Lateral strength 6.4.2 9.3 >500N vertical Flame propagation 10.1 > 30 secs >200N Horizontal Cleat Spacing Cleat spacing is dependent on system fault level and centre to centre distance between cables. Therefore correct cleat spacing should be calculated for each installation and environment. Example spacing for guidance only: 43mm cables in trefoil @ 99kA peak = 600mm max. 64mm cables in trefoil @ 99kA peak = 900mm max. Axial strength 6.4.3 9.4 >50N (for guidance only as not possible to replicate in test setups) STC2024 STC2428 STC2832 STC3236 STC3640 STC4044 STC4448 STC4852 STC5256 STC5560 STC5763 STC6370 CJ1895 JZ2807 JZ3204 CJ1881 CJ1880 CJ1878 CJ1906 CC5911 CC5495 CC5953 CC5893 20-24 mm 24-28 mm 28-32 mm 32-36 mm 36-40 mm 40-44 mm 44-48 mm 48-52 mm 52-56 mm 55-60 mm 57-63 mm 63-70 mm
RkJQdWJsaXNoZXIy NTI5NzM=