Forte Single Stainless Steel Cleat www.jointingtech.co.uk 16 Stainless Steel Cleat Standard range for cable diameters from 40mm to 100mm Jointing Tech Part Number HSC4050 HSC5060 HSC6070 HSC7080 HSC8090 HSC90100 Wolseley Part Number CJ1888 CJ1882 CJ1872 CC5491 CJ4421 CJ1891 Cable Diameter 40-50 mm 50-60 mm 60-70 mm 70-80 mm 80-90 mm 90-100 mm FEATURES ■ Cleat body and fastenings are manufactured from 316L corrosion resistant non-magnetic stainless steel Suitable for use in harsh and extreme environments including marine and offshore Main cleat fastening bolt is retained to ease installation Cleat liner is manufactured from an extruded polymer which is an LUL approved flame retardant halogen free polymer Cleats can be supplied with or without liner Complies with IEC 61914 ■ ■ ■ ■ ■ Test Standard IEC61914:2015 Clause Test Classification Clause Test Classification Material 6.1.3 Composite Resistance to short circuit 6.4.4 1 short circuit 9.5.2 65kA RMS, 143kA Pk - tested on 34mm diameter cables at 300mm cleats spacings (Test report: 125157/VNL) Operating Temperature 6.2 -40°C to + 60°C 6.4.5 6.5.2.2 2 short circuits 9.5.3 64kA RMS, 141kA Pk – tested on 34mm diameter cables at 300mm cleats spacings (Test report: 125157/VNL) Impact Resistance 6.3.5 9.2 Very Heavy Body >16% Chromium contents - High, Outdoor - wet conditions Lateral strength 6.4.2 9.3 >900N vertical Corrosion propagation 10.1 > 30 secs >600N Horizontal Cleat Spacing As cleat spacing is dependent on system fault level and centre to centre distance between cables. For correct cleat spacing please enquire with cleat manufacturer for correct maximum cleat spacing for the system design. Axial strength 6.4.3 9.4 >320N (for guidance only as not possible to replicate in test setups)
RkJQdWJsaXNoZXIy NTI5NzM=