Earthing & Lightning Protection Earthing www.jointingtech.co.uk 38 Part number Description Size Weight each PE110 Lattice 600 x 600 x 3mm 3.98kg PE120 Lattice 900 x 900 x 3mm 7.20kg Part number Type Weight FURSECEM® Powder 25kg Part number Type Weight each CM015 Powder 25kg Part number Description Size Weight each PE010 Solid Copper 600 x 600 x 3mm 9.74kg PE020 Solid copper 900 x 900 x 3mm 21.74kg Part number Type Weight FURSECEM® Granules 25kg Part number Type Weight each CM015-PM Granules 25kg Earth Plates - Lattice & Solid Copper FEATURES ■ Designed to be buried in the ground to provide a low resistance to earth for the interconnected lightning protection system ■ Manufactured from high conductivity copper ■ Available in either solid or lattice copper ■ Lattice to BS EN 13601 ■ Solid copper to BS EN 12163 FEATURES ■ Designed to be added in place of sand and aggregate to cement to provide a conductive aggregate which lowers the resistance to earth ■ When used as a backfill for earth electrodes, FurseCEM® impregnated concrete greatly increases the electrodes' surface area ■ Ideal for poor ground conditions where low resistances are required ■ Will not shrink or expand, regardless of water content ■ Can lower rod resistance to earth by as much as 50% ■ Available without or pre-mixed with cement ■ Can be stored of long periods of time without product deterioration FEATURES ■ Designed to be mixed with water to produce a moisture retaining clay which lowers the resistance to earth ■ The clay is a sodium activated montmorillonite which when mixed with water swells to many times its dry volume ■ Bentonite has the ability to hold moisture content for a considerable period of time and absorb moisture from the surrounding area ■ Ideal for poor ground conditions where low resistances are problematical ■ Available in powder and granules FurseCEM® Conductive Aggregate Bentonite
RkJQdWJsaXNoZXIy NTI5NzM=