Door closers & exit hardware Door furniture Locks & cylinders 207 UNION Trade catalogue Fitting position Doors with door closers 3 hinges - 2 at the top and one at the bottom for improved load bearing. For some doors (heavier construction or with a hold open door closing device) it is best practice to fit two hinges at the top of the door with the third hinge at the bottom of the door. Hinges should be positioned as follows: • C entre line of the top hinge 250mm from the top edge of the door • C entre line of the third hinge 200mm from the centre line of the top hinge • C entre line of the bottom hinge 250mm from the bottom edge of the door Height Width Hinge dimensions All products supplied with fixings Max door mass (including adjustment for door closer, furniture and environmental conditions) Note: If a closer is fitted, door mass increases by 20% or 75% if a backcheck closer. 250mm 200mm Additional support for top hinge 250mm Did you know we also offer cabinet hinges? Take a look at our range of cabinet furniture on pages 235-237
RkJQdWJsaXNoZXIy NTI5NzM=